FritzZyme® TurboStart® 700 Freshwater

Directions & Dosage

For new systems, dose 1 oz (29 mL) per 50 US gallons (189 L). Shake well before dosing. To decrease cycling time, FritzZyme® TurboStart® 700 can be safely used up to 5x recommended dosage.

For best results, maintain ideal water parameters noted below and use FritzZyme® TurboStart 700 before the expiration date on the package
All chlorine and chloramines must be removed from water before adding FritzZyme® TurboStart 700
Nitrifying bacteria require ammonia and nitrite to survive; in new systems introduce livestock or another ammonia source like Fishless Fuel to start cycling
Maintain adequate water flow or aeration
Discontinue use of skimmer and UV sterilizers for at least 5 days after application
Store refrigerated
No contraindications: can be used with all of our other products and meds
Safe for use with all species, including plants and invertebrates
Safe to add directly into a tank with livestock present
Systems may be slightly cloudy or have an earthy odor for several hours after treatment
Variations of odor and color between bottles is normal, a strong sulfur smell does not mean the bacteria are dead
Do not freeze or overheat. Store in a cool, dark place
Overdosed? Live nitrifying bacteria are very safe even if overdosed. Observe for any distress, perform small water changes if necessary

Ideal parameters for FritzZyme® TurboStart 700 nitrifying bacteria:
Temperature: 77-86 F (25-30 C)
pH: 7.3-8.0; nitrification is completely inhibited below pH 6.0
Salinity: 0 – 6 ppt (1.000 to 1.0045 sg); active up to 15 ppt (1.011 sg)
Alkalinity (KH): minimum 4.5 dKH or 80.5 ppm KH
Phosphate: above 0 ppm